Small Parts Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #6-32, 5/16" Head Diameter, 3/16" Head Height, 29/32" Length (Pack of 10)

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #6-32, 5/16" Head Diameter, 3/16" Head Height, 29/32" Length (Pack of 10) Review

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #6-32, 5/16" Head Diameter, 3/16" Head Height, 29/32" Length (Pack of 10) Feature

• Used for equipment panels when hardware is subject to loss
• Stainless Steel is suitable where formability and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #6-32, 5/16" Head Diameter, 3/16" Head Height, 29/32" Length (Pack of 10) Overview

Panel Screws are used for equipment panel assemblies, cabinets, and enclosures, when hardware is subject to loss.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Small Parts Stainless Steel Panel Screw, Fillister Head, Slotted Drive, #4-40, 11/64" Head Diameter, 0.107" Head Height, 1" Length (Pack of 10)

Stainless Steel Panel Screw, Fillister Head, Slotted Drive, #4-40, 11/64" Head Diameter, 0.107" Head Height, 1" Length (Pack of 10) Review

Stainless Steel Panel Screw, Fillister Head, Slotted Drive, #4-40, 11/64" Head Diameter, 0.107" Head Height, 1" Length (Pack of 10) Feature

• Used for equipment panels when hardware is subject to loss
• Stainless Steel is suitable where formability and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Stainless Steel Panel Screw, Fillister Head, Slotted Drive, #4-40, 11/64" Head Diameter, 0.107" Head Height, 1" Length (Pack of 10) Overview

Panel Screws are used for equipment panel assemblies, cabinets, and enclosures, when hardware is subject to loss.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Pico Pico 6312C #8 x 1-1/4" Chrome Trim Screw w/Countersunk Washer 15 per Package

Pico 6312C #8 x 1-1/4" Chrome Trim Screw w/Countersunk Washer 15 per Package Review

Pico 6312C #8 x 1-1/4" Chrome Trim Screw w/Countersunk Washer 15 per Package Feature

• #8 x 1-1/4" Trim Screw
• Includes Countersunk Washer
• Chrome
• 15 per Package

Pico 6312C #8 x 1-1/4" Chrome Trim Screw w/Countersunk Washer 15 per Package Overview

Pico 6312C #8 x 1-1/4" Chrome Trim Screw w/Countersunk Washer 15 per Package

Pico Pico 6335C #10 x 1" Black Trim Screw w/Countersunk Washer 15 per Package

Pico 6335C #10 x 1" Black Trim Screw w/Countersunk Washer 15 per Package Review

Pico 6335C #10 x 1" Black Trim Screw w/Countersunk Washer 15 per Package Feature

• #10 x 1" Trim Screw
• Includes Countersunk Washer
• Black
• 15 per Package

Pico 6335C #10 x 1" Black Trim Screw w/Countersunk Washer 15 per Package Overview

Pico 6335C #10 x 1" Black Trim Screw w/Countersunk Washer 15 per Package

Small Parts Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #10-32, 7/16" Head Diameter, 1/4" Head Height, 5/8" Length (Pack of 10)

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #10-32, 7/16" Head Diameter, 1/4" Head Height, 5/8" Length (Pack of 10) Review

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #10-32, 7/16" Head Diameter, 1/4" Head Height, 5/8" Length (Pack of 10) Feature

• Used for equipment panels when hardware is subject to loss
• Stainless Steel is suitable where formability and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Phillips drive is designed to cam out under too much torque
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #10-32, 7/16" Head Diameter, 1/4" Head Height, 5/8" Length (Pack of 10) Overview

Panel Screws are used for equipment panel assemblies, cabinets, and enclosures, when hardware is subject to loss.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Small Parts Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #4-40, 5/16" Head Diameter, 5/16" Head Height, 3/8" Length (Pack of 10)

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #4-40, 5/16" Head Diameter, 5/16" Head Height, 3/8" Length (Pack of 10) Review

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #4-40, 5/16" Head Diameter, 5/16" Head Height, 3/8" Length (Pack of 10) Feature

• Used for equipment panels when hardware is subject to loss
• Stainless Steel is suitable where formability and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Stainless Steel Panel Screw, Knurled Head, Slotted Drive, #4-40, 5/16" Head Diameter, 5/16" Head Height, 3/8" Length (Pack of 10) Overview

Panel Screws are used for equipment panel assemblies, cabinets, and enclosures, when hardware is subject to loss.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Morris Products Morris Products 30740 Painted Plate Screw, White, 1" Size, 6-32 (Pack of 100)

Morris Products 30740 Painted Plate Screw, White, 1" Size, 6-32 (Pack of 100) Review

Morris Products 30740 Painted Plate Screw, White, 1" Size, 6-32 (Pack of 100) Feature

• Tools
• Screws & Anchor Kits

Morris Products 30740 Painted Plate Screw, White, 1" Size, 6-32 (Pack of 100) Overview

Size: 1in
Color: White

A classic 6/32 Painted Plate Screw.

• 6/32 Painted Plate Screw Order Qty of 100 = 1 Box of 100

Small Parts Stainless Steel Panel Screw, Pan Head, Phillips Drive, #8-32, 0.326" Head Diameter, 0.11" Head Height, 1-1/4" Length (Pack of 5)

Stainless Steel Panel Screw, Pan Head, Phillips Drive, #8-32, 0.326" Head Diameter, 0.11" Head Height, 1-1/4" Length (Pack of 5) Review

Stainless Steel Panel Screw, Pan Head, Phillips Drive, #8-32, 0.326" Head Diameter, 0.11" Head Height, 1-1/4" Length (Pack of 5) Feature

• Used for equipment panels when hardware is subject to loss
• Stainless Steel is suitable where formability and cost are important considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Stainless Steel Panel Screw, Pan Head, Phillips Drive, #8-32, 0.326" Head Diameter, 0.11" Head Height, 1-1/4" Length (Pack of 5) Overview

Panel Screws are used for equipment panel assemblies, cabinets, and enclosures, when hardware is subject to loss.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Pico Pico 6305C #8 x 5/8" Chrome Trim Screw w/Countersunk Washer 15 per Package

Pico 6305C #8 x 5/8" Chrome Trim Screw w/Countersunk Washer 15 per Package Review

Pico 6305C #8 x 5/8" Chrome Trim Screw w/Countersunk Washer 15 per Package Feature

• #8 x 5/8" Trim Screw
• Includes Countersunk Washer
• Chrome
• 15 per Package

Pico 6305C #8 x 5/8" Chrome Trim Screw w/Countersunk Washer 15 per Package Overview

Pico 6305C #8 x 5/8" Chrome Trim Screw w/Countersunk Washer 15 per Package

SmartHome Replacement INSTEON KeypadLinc Frame Screws, 4-Pack

Replacement INSTEON KeypadLinc Frame Screws, 4-Pack Review

Replacement INSTEON KeypadLinc Frame Screws, 4-Pack Feature

• Kit includes 4 replacement screws for attaching a KeypadLinc frame

Replacement INSTEON KeypadLinc Frame Screws, 4-Pack Overview

Did you lose a screw in the shag carpet when changing out an INSTEON KeypadLinc frame again? Not to worry, replacement KeypadLinc frame screws are now available. Comes in a pack of 4. Note: Screws are not intended for use with INSTEON Decora-Style swit

AVB Cable AVB Cable RSP25 AVB Cable Shelving Unit Rack Screws with Washer (25)

AVB Cable RSP25 AVB Cable Shelving Unit Rack Screws with Washer (25) Review

AVB Cable RSP25 AVB Cable Shelving Unit Rack Screws with Washer (25) Feature

• Made of hardened steel
• Designed with a pilot point for easy insertion

AVB Cable RSP25 AVB Cable Shelving Unit Rack Screws with Washer (25) Overview

Use these screws to assemble your AVB rack shelves, blank panels and patch panels. They are constructed with hardened Steel and coated with black phosphate. They are designed with 10-32 threads. And are 3/4 inches in size and 22 millimeters long. Their pi

Pico Pico 6330C #8 x 1" Black Trim Screw w/Countersunk Washer 15 per Package

Pico 6330C #8 x 1" Black Trim Screw w/Countersunk Washer 15 per Package Review

Pico 6330C #8 x 1" Black Trim Screw w/Countersunk Washer 15 per Package Feature

• #8 x 1" Trim Screw
• Includes Countersunk Washer
• Black
• 15 per Package

Pico 6330C #8 x 1" Black Trim Screw w/Countersunk Washer 15 per Package Overview

Pico 6330C #8 x 1" Black Trim Screw w/Countersunk Washer 15 per Package

Small Parts Stainless Steel Panel Screw, Oval Head, Slotted Drive, #6-32, 0.261" Head Diameter, 0.117" Head Height, 1-5/16" Length (Pack of 10)

Stainless Steel Panel Screw, Oval Head, Slotted Drive, #6-32, 0.261" Head Diameter, 0.117" Head Height, 1-5/16" Length (Pack of 10) Review

Stainless Steel Panel Screw, Oval Head, Slotted Drive, #6-32, 0.261" Head Diameter, 0.117" Head Height, 1-5/16" Length (Pack of 10) Feature

• Used for equipment panels when hardware is subject to loss
• Stainless Steel is suitable where formability and cost are important considerations
• Oval head style for recessed finish with a slightly rounded surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Stainless Steel Panel Screw, Oval Head, Slotted Drive, #6-32, 0.261" Head Diameter, 0.117" Head Height, 1-5/16" Length (Pack of 10) Overview

Panel Screws are used for equipment panel assemblies, cabinets, and enclosures, when hardware is subject to loss.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Similar to a flat-head style, the oval head style has a slightly convex top surface; it is typically used for appearance. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.